LFL-300E-Z [ＳＴＲＡＩＧＨＴＥＮＥＲ ＦＥＥＤＥＲ]
LFL-300E-Z
・The zigzag feed function lowers costs by reducing scrap.
・Openings in the frame both above and below the work rolls enable easy cleaning of the rolls, which greatly reduces scoring marks on the material.
Photograph
| Material Width[mm] |
30 - 300
30 - 160
30 - 110
|
| Material Thickness[mm] |
0.3 - 1.6
0.3 - 2.3
0.3 - 3.2
|
| Coil Weight(MAX)[kg] |
1200 × 1 |
| Coil O.D.[mm] |
φ800 - φ1200 |
| Coil I.D.[mm] |
φ508 |
| Feed Length[mm] |
10 - 300 |
| Feed Speed[m/min] |
- 15 |
| No. of Work Rolls |
Up:3 / Down:3 |
| Passline Height[mm] |
1100 |
| Zigzag Feed Performance[spm] |
57 |
| Two-Out Zigzag Stroke[mm] |
0～150 |
| Three-Out Zigzag Stroke[mm] |
0～200 |
| Power Source Capacity[kVA] |
6 |
| Required Power Source[V,HZ] |
AC 200/220, 50/60 Hz, 3-phase |
| Required Air Pressure[MPa] |
0.5 |
|
| Standard Equipment |
Feed Angle Selection（180°/240°）
Material End Detection
Auto Release Device (With Advance Angle Function)
Work Roll Cleaning Feature
Plated Work Rolls
|
| Optional Equipment |
Auto-Threading
Backstop Rolls
Material oil coating device
Micro Feeder
Motorized Nibbler/Shear
|
|
